Water Filtration

EPA has established pollutant-specific minimum testing schedules for public water systems. To find out how frequently your drinking water is tested, contact your water system or the agency in your state in charge of drinking water. ( Check your city’s water )

If a problem is detected, immediate retesting requirements go into effect along with strict instructions about how the system informs the public. Until the system can reliably demonstrate that it is free of problems, the retesting is continued.

As recent as 2001, one out of every four community water filtration systems did not conduct testing or report the results for all of the monitoring required to verify the safety of their drinking water. Although failure to monitor does not necessarily suggest safety problems, conducting the required reporting is crucial to ensure problems will be detected. Consumers can help make certain monitoring and reporting requirements are met by first contacting their state drinking water agency to determine if their water supplier is in compliance. If the water system is not meeting the requirements, consumers can work with local and state officials and the water supplier to make sure the required monitoring and reporting occurs.

A network of government agencies monitor tap water suppliers and enforce drinking water standards to ensure the safety of public water supplies. These agencies include EPA, state departments of health and environment, and local public health departments. There are many systems in place

Excerpt from EPA publication: “Water On Tap”

You must be logged in to post a comment.