Water Filtration

Pure Water is Fundamental to All Life on Earth

Site Search:

Archive for March, 2008

 

surface and ground water

Surface Water is just what the name implies; it is water found in a river, lake or other surface impoundments. This water is usually not very high in mineral content, and many times is called “soft water” even though it usually is not. Surface water is exposed to many different contaminants, such as animal wastes, pesticides, insecticides, industrial wastes, algae and many other organic materials. Even surface water found in a pristine mountain stream possibly contains Giardia or Coliform Bacteria from the feces of wild animals, and should be boiled or disinfected by some means prior to drinking.

Ground Water is that which is trapped beneath the ground. Rain that soaks into the ground, rivers that disappear beneath the earth, melting snow are but a few of the sources that recharge the supply of underground water. Because of the many sources of recharge, ground water may contain any or all of the contaminants found in surface water as well as the dissolved minerals it picks up during it’s long stay underground. Waters that contains dissolved minerals, such as calcium and magnesium above certain levels are considered “hard water” Because water is considered a “solvent”, ie, over time it can break down the ionic bonds that hold most substances together, it tends to dissolve and ‘gather up’ small amounts of whatever it comes in contact with. For instance, in areas of the world where rock such as limestone, gypsum, fluorspar, magnetite, pyrite and magnesite are common, well water is usually very high in calcium content, and therefore considered “hard”.

Due to the different characteristics of these two types of water, it is important that you know the source of your water — Surface or Ground. Of the 326 million cubic miles of water on earth, only about 3% of it is fresh water; and 3/4 of that is frozen. Only 1/2 of 1% of all water is underground; about 1/50th of 1% of all water is found in lakes and streams. The average human is about 70% water. You can only survive 5 or less days without water.

March 24, 2008

Reverse OsmosisReverse osmosis systems(RO) use a separation process that uses pressure to force a solvent through a membrane that retains the solute on one side and allows the pure solvent to pass to the other side. More formally, it is the process of forcing a solvent from a region of high solute concentration through a membrane to a region of low solute concentration by applying a pressure in excess of the osmotic pressure. This is the reverse of the normal osmosis process, which is the natural movement of solvent from an area of low solute concentration, through a membrane, to an area of high solute concentration when no external pressure is applied. The membrane here is semipermeable, meaning it allows the passage of solvent but not of solute.

 

The membranes used for reverse osmosis have a dense barrier layer in the polymer matrix where most separation occurs. In most cases the membrane is designed to allow only water to pass through this dense layer while preventing the passage of solutes (such as salt ions). This process requires that a high pressure be exerted on the high concentration side of the membrane, usually 2–17 bar (30–250 psi) for fresh and brackish water, and 40–70 bar (600–1000 psi) for seawater, which has around 24 bar (350 psi) natural osmotic pressure which must be overcome.

 

This process is best known for its use in desalination (removing the salt from sea water to get fresh water), but it has also been used to purify fresh water for medical, industrial and domestic applications since the early 1970s.

 

 

March 24, 2008

Water Filter

Water filtration and purification are the processes used forremoving contaminants from a raw water source. The goal is to produce water for a specific purpose with a treatment profile designed to limit the inclusion of specific materials; most water is purified for human consumption (drinking water). Water purification may also be designed for a variety of other purposes, including to meet the requirements of medical, pharmacology, chemical and industrial applications. Methods include, but are not limited to: ultraviolet light, filtration, water softening, reverse osmosis, ultrafiltration, deionization and powdered activated carbon treatment.

 

Water purification may remove: particulate sand; suspended particles of organic material; parasites, Giardia; Cryptosporidium; bacteria; algae; virus; fungi; etc. Minerals calcium, silica, magnesium, etc. and toxic metals (lead, copper, chromium etc). Some purification may be elective in the purification process, including smell (hydrogen sulfide remediation), taste (mineral extraction), and appearance (iron incapsulation).

 

Governments usually dictate the standards for drinking water quality. These standards will require minimum / maximum set points of contaminants and the inclusion of control elements that produce drinking water. Quality standards in many countries require specific amounts of disinfectant (such as chlorine or ozone) in the water after it leaves the water treatment plant (WTP), to reduce the risk of re-contamination while the water is in the distribution system.

 

It is not possible to tell whether water is safe to drink just by looking at it. Simple procedures such as boiling or the use of a household activated carbon filter are not sufficient for treating all the possible contaminants that may be present in water from an unknown source. Even natural spring water - considered safe for all practical purposes in the 1800s - must now be tested before determining what kind of treatment, if any, is needed. Chemical analysis, while expensive, is the only way to obtain the information necessary for deciding on method of purification.

 

Welcome!

Author: AychTewOh
March 24, 2008

Pure WaterSound Water Solutions is your gateway to healthier living through better water. Most people don’t know that clean water is so critical. From showering and drinking to home care and more, we know that water has to be effective - removing contaminants, not adding them. You can remove chlorine and particulate matter including well known pathogens with affordable water filters and filtration systems at Sound Water. Whether it’s whole house or just drinking water, filtration is a key element in happy, healthy living!

 

 

Check Your City’s Water

Author: charles6898
March 24, 2008

Check the quality of your city’s water here.

Link brought to you by www.soundwatersolutions.com

Salt Water Fuel

Author: admin
March 19, 2008


Link brought to you by www.SoundWaterSolutions.com

As an avid fan of all things sci-fi, I’ve always been quickly drawn to anything that uses words like “nanotechnology” undoubtedly because it just sounds cool, but also because I suppose I’m always secretly hoping that if I read on I’ll hear about some new scientific breakthrough that will deliver to the world that which until now was only in the mind of someone like Gene Roddenberry. Admittedly, the article “Water Filters Rely on Nanotech” may not have rivaled an episode of Star Trek, but to those of us living in the here and now Read the rest of this entry »

CRYSTAL QUEST® Reverse Osmosis with the Booster Pump is the perfect 5-stage Reverse Osmosis System for the Do-It-Your-Selfer on a budget that still wants the great-tasting pure water that RO provides.  CRYSTAL QUEST® Reverse Osmosis water filters come with everything needed to install this system with complete easy to follow instructions, and they are now at an an exceptionally low, discounted price at www.soundwatersolutions.com!

Reverse Osmosis Water Filters

You are currently browsing the Water Filtration weblog archives for March, 2008.